Podnova Player  Windows library  Podnova home
License: All
Sort by: Relevance

Optimal pipe diameter in Title/Summary

SPipe

SPipe

If you're looking for a full featured domestic supply water pipe sizing program then S-Pipe is what you want. It has lots of built-in pipe and fitting data, plus the flexibility to let you enter your own data, plus direct links with Autodesk Building Systems and AutoCAD MEP.

  • Publisher: Elite Software Development, Inc.
  • Last updated: May 11th, 2010
AioFlo

AioFlo

AioFlo is a hydraulic calculator that can determine either the pipe diameter, fluid flow rate or pressure drop when the other two components are known. The program gives the fluid flows in mass or volumetric terms and viscosity in dynamic or kinematic units.

DPipe

DPipe

The Elite Software D-Pipe program quickly calculates optimal pipe and vent sizes for sanitary building drain systems with a virtually unlimited number of pipe sections. Existing drainage systems can also be analyzed because D-Pipe allows the designer to fix the size of any and all pipe sections.

  • Publisher: Elite Software Development, Inc.
  • Home page: www.elitesoft.com
  • Last updated: May 8th, 2010

Optimal pipe diameter in Description

Pipe Flow Wizard

Pipe Flow Wizard

Pipe Flow Wizard allows calculating pipe pressure drop and flow rate, being a simple-to-use, accurate and handy “what if” piping calculation solution for both liquids and gases. It comes with a simple interface that allows performing 4 different types of calculations for a single pipe based on known data.

  • Publisher: PipeFlow.co.uk
  • Last updated: March 17th, 2010
PipeSolver

PipeSolver

PipeSolver is a software tool for computing the fluid flow in a pipe network, using the Hardy-Cross method. Two types of problem may be defined: - Flowrate problem - Dimensioning problem After the solution, values for the flowrate, pressure, and flow velocity are available at each location of the network.

  • Publisher: Antonio Gameiro Lopes
  • Last updated: November 29th, 2011
Pump Head Loss Calculator

Pump Head Loss Calculator

Free pump head loss calculator for saltwater aquariums. To use it, all you have to do is select your pump from the drop-down list, followed by your pipe diameter. Next enter all of your plumbing variables and click the "Solve" button. The results will be printed at the bottom of your screen.

  • Publisher: Shane Graber
  • Home page: reefbuilders.com
  • Last updated: December 13th, 2009
LICAD for AutoCAD

LICAD for AutoCAD

LICAD for AutoCAD is an application used to read the LICAD L3D export files into AutoCAD 3D. The exports will be generated and shown as 3D objects. LICAD for AutoCAD features support for pipe diameter, temperature of the medium, operating load, displacement, hanger configuration and more.

  • Publisher: LISEGA AG
  • Last updated: March 17th, 2015
AFT Mercury

AFT Mercury

AFT Mercury is built on and includes all of the modeling building tools and analysis capabilities of AFT Fathom. Models of incompressible piping systems may be developed and analyzed within AFT Mercury as in AFT Fathom, or model files developed within AFT Fathom may be opened by AFT Mercury. Please refer to to AFT Fathom pages for a description of of these capabilities.

  • Publisher: Applied Flow Technology
  • Last updated: February 14th, 2012

Additional Optimal pipe diameter selection

Pipe Flow Advisor

Pipe Flow Advisor

Pipe Flow Advisor is a utility that can help you calculate flow rate, depth or volume for water flowing through pipes, tubes, channels and weirs or the time taken for a tank to empty. The developer specifies it that the results are estimates obtained using the Manning formula, and that more accurate results are obtained with practical measurements.

  • Publisher: PipeFlow Software
  • Home page: www.pipeflow.co.uk
  • Last updated: January 10th, 2009
Pipe Properties

Pipe Properties

The program will report: * Pipe Outside Diameter * Inside Diameter * Wall Thickness * Inside CS Area * Traverse Metal Area * Moment of Inertia * Section Modulus * Radius of Gyration * Outside Surface Area * Inside Surface Area * Weight

  • Publisher: flowmeterdirectory.com
  • Last updated: September 28th, 2010
Double Pipe Heat Exchanger Design

Double Pipe Heat Exchanger Design

DHex is a software tool that is made to demonstrate the chemical design calculations of Double pipe (hairpin) Heat Exchangers.The software will do all the thermal calculations involved in the design and will generate a summary of all results..etc

  • Publisher: WeBBusterZ Engineering Software
  • Last updated: April 5th, 2023
Pipe Flow Expert

Pipe Flow Expert

Pipe Flow Expert is a program for designing and analyzing complex pipe networks where the flows and pressures must be balanced to solve the system. It features Isometric 3D drawing and standard 2D piping layouts, customized PDF reports, robust calculation engine that can solve complex pipe networks, modelling of up to 1000 pipes with the full license, and more.

  • Publisher: Daxesoft Ltd.
  • Home page: www.pipeflow.co.uk
  • Last updated: February 21st, 2017
Flow Calculator

Flow Calculator

Flow calculator is a small, compact and useful tool which helps in doing flow related calculations very easy and fast. The main advantage of this software is its compactness and size. The simple interface only contains three text boxes. These text boxes correspond to the inside diameter of the cylindrical pipe, velocity and the volumetric flow rate.

  • Publisher: eesiflo.com
  • Last updated: November 17th, 2010
PIPE-FLO Professional

PIPE-FLO Professional

PIPE-FLO Professional is a comprehensive piping system analysis package that provides you with a clear picture of the design and operation of your entire piping system. PIPE-FLO Professional provides a total picture of the piping system including the steady state flow rates and pressures throughout the system, along with the interaction of pumps, control valves, and flow meters.

  • Publisher: Engineered Software, Inc.
  • Last updated: January 14th, 2015
Saravel Refrigerant Pipe Sizing

Saravel Refrigerant Pipe Sizing

Saravel Refrigerant Pipe Sizing program designed by Saravel Corp. Design & Engineering Department , has following specifications: Refrigerant Selection, Valves and Fittings Selection, Unit Conversion, Save entered data for future use, Double Riser Calculation, Print the calculation Result, Refrigerant piping instruction

  • Publisher: saravel
  • Home page: www.saravel.com
  • Last updated: October 16th, 2009
Named Pipe TCP Proxy

Named Pipe TCP Proxy

Named Pipe TCP Proxy - utility which provides access to named pipes on Windows (special files with names built using the following rule -\pipe\) via TCP/IP. Utility has intuitive GUI and allows to create "tcp port" "named pipe" mappings. To access certain named pipe you need to create such a mapping and then connect to assigned tcp port using any terminal client program.

Warp Pipe

Warp Pipe

Warp Pipe features a uniform user experience across all platforms, and serves as a testament to Warp Pipe team commitment to multi-platform support -- providing all Nintendo GameCube gamers the ability to bring their GameCubes online with ease no matter what operating system you may have in the house.

  • Publisher: Warp Pipe Technologies
  • Last updated: February 26th, 2010
S-Pipe

S-Pipe

S-Pipe is a program that offers you built-in pipe and fitting data, the flexibility to let you enter your own data and direct links with 32-bit Autodesk Building Systems and 32-bit AutoCAD MEP. You can sizes both hot and cold water supply systems using the ASHRAE and ASPE procedures.

  • Publisher: Elite Software Development, Inc.
  • Last updated: January 30th, 2018