Optimal pipe diameter software in Title/Summary

SPipe

If you're looking for a full featured domestic supply water pipe sizing program then S-Pipe is what you want. It has lots of built-in pipe and fitting data, plus the flexibility to let you enter your own data, plus direct links with Autodesk Building Systems and AutoCAD MEP.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: May 11th, 2010

AioFlo

AioFlo is a hydraulic calculator that can determine either the pipe diameter, fluid flow rate or pressure drop when the other two components are known. The program gives the fluid flows in mass or volumetric terms and viscosity in dynamic or kinematic units.

• Publisher: Katmar Software
• Home page: www.katmarsoftware.com
• Last updated: September 14th, 2014

EZ Pipe Demo

EZ Pipe Software will automatically tile pages to make larger templates, any angle - for branch from pipe, miter elbow, miter cut, or pipe through plate. Any printer old, cheap, wide carriage, dot matrix printers work well. If you've ever tried to make these intersections, you know. You could spend hours struggling in harsh weather, and still have a poor fit - gaps and wrong angles.

• Publisher: EZ Pipe Software
• Last updated: February 6th, 2010

Optimal pipe diameter software in Description

Pipe Flow Wizard

Pipe Flow Wizard allows calculating pipe pressure drop and flow rate, being a simple-to-use, accurate and handy “what if” piping calculation solution for both liquids and gases. It comes with a simple interface that allows performing 4 different types of calculations for a single pipe based on known data.

• Publisher: PipeFlow.co.uk
• Home page: www.pipeflow.co.uk
• Last updated: March 17th, 2010

DPipe

The Elite Software D-Pipe program quickly calculates optimal pipe and vent sizes for sanitary building drain systems with a virtually unlimited number of pipe sections. Existing drainage systems can also be analyzed because D-Pipe allows the designer to fix the size of any and all pipe sections.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: May 8th, 2010

PipeSolver

PipeSolver is a software tool for computing the fluid flow in a pipe network, using the Hardy-Cross method. Two types of problem may be defined: - Flowrate problem - Dimensioning problem After the solution, values for the flowrate, pressure, and flow velocity are available at each location of the network.

• Publisher: Antonio Gameiro Lopes
• Last updated: November 29th, 2011

Pump Head Loss Calculator

Free pump head loss calculator for saltwater aquariums. To use it, all you have to do is select your pump from the drop-down list, followed by your pipe diameter. Next enter all of your plumbing variables and click the "Solve" button. The results will be printed at the bottom of your screen.

• Publisher: Shane Graber
• Last updated: December 13th, 2009

LICAD for AutoCAD

LICAD for AutoCAD is an application used to read the LICAD L3D export files into AutoCAD 3D. The exports will be generated and shown as 3D objects. LICAD for AutoCAD features support for pipe diameter, temperature of the medium, operating load, displacement, hanger configuration and more.

• Publisher: LISEGA AG
• Last updated: March 17th, 2015

Additional Optimal pipe diameter software selection

S-Pipe

S-Pipe is a program that offers you built-in pipe and fitting data, the flexibility to let you enter your own data and direct links with 32-bit Autodesk Building Systems and 32-bit AutoCAD MEP. You can sizes both hot and cold water supply systems using the ASHRAE and ASPE procedures.

• Publisher: Elite Software Development, Inc.
• Home page: www.elitesoft.com
• Last updated: January 30th, 2018

GDLINK

GDLINK is a software used for configuring antennas for optimal performance. The software is easy to use and intuitive. It was built with one purpose in mind: easy configuration and fast deployment. Also the customization settings allow you to modify the parameters just the way you like it.

• Publisher: Jablotron Ltd.
• Last updated: October 6th, 2008

CS Print and Color Manager

CreativeStudio Print and Color Manager is a powerful tool that ensures your Virtuoso SG400 and SG800 printers deliver prints of optimal quality. This software is used to send print files from CreativeStudio Online Designer to your printer, and enables you to choose a variety of custom options specific to your printing needs.

• Publisher: Sawgrass Technologies, Inc.
• Home page: www.sawgrassink.com
• Last updated: June 30th, 2016

AFT Mercury

AFT Mercury is built on and includes all of the modeling building tools and analysis capabilities of AFT Fathom. Models of incompressible piping systems may be developed and analyzed within AFT Mercury as in AFT Fathom, or model files developed within AFT Fathom may be opened by AFT Mercury. Please refer to to AFT Fathom pages for a description of of these capabilities.

• Publisher: Applied Flow Technology
• Last updated: February 14th, 2012

LightScribe System Software

LightScribe System Software (LSS) facilitates good operation of the LightScribe system. It comes with a handy control panel that allows the user to customize the LightScribe settings and even keep track of the system’s information. The user can double click on the LightScribe icon placed in the system tray on the right lower corner of the Windows desktop screen.

• Publisher: LightScribe
• Home page: lightscribesoftware.org
• Last updated: June 9th, 2014

Pipe Flow Advisor

Pipe Flow Advisor is a utility that can help you calculate flow rate, depth or volume for water flowing through pipes, tubes, channels and weirs or the time taken for a tank to empty. The developer specifies it that the results are estimates obtained using the Manning formula, and that more accurate results are obtained with practical measurements.

• Publisher: PipeFlow Software
• Last updated: January 10th, 2009

Software Informer

For this new version, Software Informer has taken a small step back to make a giant leap forward. It has recovered the more compact and smaller interface we all knew and loved without compromising any of its many features and functions. All the updates for your apps and drivers, all the free programs, recommendations, and reviews are still there – they just take less space on your desktop now.

• Publisher: Informer Technologies, Inc.
• Last updated: October 16th, 2024

Double Pipe Heat Exchanger Design

DHex is a software tool that is made to demonstrate the chemical design calculations of Double pipe (hairpin) Heat Exchangers.The software will do all the thermal calculations involved in the design and will generate a summary of all results..etc

• Publisher: WeBBusterZ Engineering Software
• Home page: www.webbusterz.com
• Last updated: April 5th, 2023

NVIDIA PhysX System Software

We are living with physics games at the moment and for the industry it is not an easy task. The environment is based on a unique set of physics algorithms which require amounts of simultaneous mathematical and logical calculations to make a simple game display. This is where NVIDIA PhysX Technology comes in.

• Publisher: NVIDIA Corporation
• Home page: www.nvidia.com
• Last updated: February 27th, 2017

Corsair Headset Software

It allows you to toggle Dolby Headphone Surround On/Off. “Source Type” Selection enables you to select the specific type of audio source content being played in order to best optimize the surround experience. This visual display is to clarify to the user what is being selected in the “Source Type” dropdown menu.

• Publisher: Corsair
• Last updated: June 14th, 2013