Carrier energy analysis program in Title/Summary
Carrier's Hourly Analysis Program is two powerful tools in one package - versatile features for designing HVAC systems for commercial buildings AND powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives.
- Publisher: Carrier Corporation
- Home page: www.carrier.com
Building thermal performance calculations are made for two primary reasons. They are made to size and select mechanical equipment or to predict the annual energy consumption of a structure. While these two tasks are not mutually exclusive, and some programs can handle both tasks, they do tend to be conducted in isolation from each other.
- Publisher: Energy Analysis Utility
- Home page: www.wbdg.org
CULV5 is an analysis tool for concrete box culverts. The program determines the forces acting on each of the different members of the culvert using the direct stiffness method. The user provides input data for loading conditions, structure geometry, and member sizes.
- Publisher: Texas Department of Transportation
- Home page: www.txdot.gov
- Last updated: August 10th, 2013
Carrier energy analysis program in Description
Carrier's Hourly Analysis Program is two powerful tools in one package. HAP provides versatile features for designing HVAC systems for commercial buildings. It also offers powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives. By combining both tools in one package significant time savings are achieved.
- Publisher: National Institute of Building Sciences
- Home page: www.wbdg.org
- Last updated: September 28th, 2017
CBECC-Com (California Building Energy Code Compliance) is an open source project that may be used by Code Agencies, Rating Authorities, or Utility Programs in the development of energy codes, standards, or efficiency programs. Architects, engineers, and energy consultants may also use these tools to demonstrate compliance with energy codes or beyond-code programs.
- Publisher: California Energy Commission
- Home page: bees.archenergy.com
- Last updated: November 7th, 2016
SOLV™ is a powerful simulation program that will calculate current and voltage distortion levels by simulating the Mirus Lineator™ and Variable Speed Drive (VSD) / Variable Frequency Drive (VFD) based on your load requirement. SOLV™ will help you find the right solution for your VSD application by accurately predicting the performance level you can expect
- Publisher: Mirus International Inc.
- Home page: www.mirusinternational.com
- Last updated: May 25th, 2012
Generate Sefaira views to determine what families/elements are being interpreted in Sefaira. Generating views will filter out all families that are not relevant for your energy analysis. Once you’ve generated views, you can click into your Visibility/Graphics (hot key VG or VV) to see the model families that Sefaira reads.
- Publisher: Sefaira Inc.
- Last updated: September 29th, 2015
TREAT is a professional energy audit software for comprehensive energy analysis and building modeling. Main features: - Create models quickly and easily with building component libraries. - Calculate energy savings for individual improvements or assemble improvements in interactive packages. - Select Improvements from Libraries.
- Publisher: Performance Systems Development
- Home page: psdconsulting.com
- Last updated: October 7th, 2016
Additional Carrier energy analysis program selection
Mini Analysis Program is an essential program for neuroscientists who are studying spontaneous activities. It detects peaks of any type, any shape, any direction, and any size. It's flexibility allows detection of virtually any kind of peaks you can imagine, such as, spontaneous miniature synaptic currents and potentials, action potential spikes, calcium imaging peaks, etc.
- Publisher: Synaptosoft
- Last updated: December 27th, 2009
The Test Validation & Analysis Program (TVAP) includes two Excel Workbooks that are designed to be used by personnel professionals to aid in developing and validating written tests that address professional standards, the Uniform Guidelines on Employee Selection Procedures (1978), and relevant court cases.
- Publisher: Biddle Consulting Group, Inc.
- Last updated: December 14th, 2011
PDA is a Plunger Design and Analysis program that compares plunger lift performance to several velocity strings of different diameters. This allows the well engineer to readily compare plunger performance to velocity string in order to select the optimum lift method.
- Publisher: PLTech
- Last updated: June 30th, 2011
EFEN is a next generation energy analysis tool using EnergyPlus simulation engine and intelligent building generator. It is packaged in a user friendly program suitable for quick analysis in early stages of design, comparative energy analysis of different fenestration options and prediction of the whole building energy use, and prediction of the size of HVAC equipment.
- Publisher: DesignBuilder Software
- Home page: www.designbuildersoftware.com
Use ASAP to model complex imaging systems, illumination systems, and light-concentrating devices. Create highly accurate source models using source images, point sources, ray grids, and fans. Model incandescent bulbs, LEDs, CCFLs, and HID arc lamps, or import from the BRO Light Source Library. Perform the analyses necessary to validate your designs without experimental prototyping.
- Publisher: Breault Research Organization
- Last updated: November 23rd, 2011
Psychrometric Analysis is a handy tool that helps you to create psychrometric charts. The charts are drawn with unmatched accuracy. It allows for complete psychrometric and process analysis, all graphically displayed. It also provides a professional state point and process report detailing all of the psychrometric and process values
- Publisher: Chempute Software
- Home page: www.handsdownsoftware.com
- Last updated: June 16th, 2012
Autodesk® Ecotect® Analysis sustainable design analysis software is a comprehensive concept-to-detail sustainable building design tool. Ecotect Analysis offers a wide range of simulation and building energy analysis functionality that can improve performance of existing buildings and new building designs.
- Publisher: Autodesk, Inc.
- Home page: usa.autodesk.com
- Last updated: June 1st, 2012
Aspen Energy Analyzer provides an easy environment to perform optimal heat exchanger network design and retrofit. Using this tool, it is possible to cut down on unnecessary energy use, for a less expensive and greener process design. It’s easy to run energy analysis from within Aspen HYSYS or Aspen Plus using the Activated Energy Analysis feature.
- Publisher: AspenTech
- Home page: www.aspentech.com
- Last updated: October 5th, 2015
Easy to use analog circuit simulation for the professional circuit designer. Main features: - Subcircuit schematic symbols auto-adjust number of pins. - Switch Mode power supplies - special setting for fastest simulation. - Time-accurate switching of controlled switches and digital logic devices. - Support for analysis of alternative designs.
- Publisher: Richard P. Andresen
- Home page: www.5Spice.com
- Last updated: July 3rd, 2017
ERDAS IMAGINE is a powerful remote sensing and image analysis program. It is a gateway to multiple integrated geospatial technologies, intuitively guiding a user through their experience with powerful tools and functionality. You can easily create robust data analysis, including Python scripting, export to OGC WPS and batch processing commands.
- Publisher: Leica Geosystems Geospatial Imaging, LLC
- Home page: www.erdas.com
- Last updated: July 24th, 2014