License: All

Sort by: Relevance

Revit 2013 energy analysis torrent in Title/Summary

Revit Extensions for Autodesk Revit 2013

Revit Extensions for Autodesk Revit 2013 extend the capabilities of Autodesk Revit 2013, Autodesk Revit Architecture 2013, Autodesk Revit MEP 2013, and Autodesk Revit Structure 2013 software in key areas, including structural analysis, modeling, reinforcement, interoperability and construction documentation.

Publisher: Autodesk
Last updated: June 16th, 2012

Hotfix - Autodesk Revit 2013 - Spot Elevation

Hotfix - Autodesk Revit 2013 - Spot Elevation is a free program that improves the product stability when placing Spot Elevations within Section Views. You will have to make sure that the Update Release 3 has been applied prior to adding the hotfix and to verify that the build number of Revit 2013 is 20130531_2115.

Publisher: Autodesk
Last updated: March 28th, 2014

Energy Analysis Utility

Building thermal performance calculations are made for two primary reasons. They are made to size and select mechanical equipment or to predict the annual energy consumption of a structure. While these two tasks are not mutually exclusive, and some programs can handle both tasks, they do tend to be conducted in isolation from each other.

Publisher: Energy Analysis Utility
Home page: www.wbdg.org

Revit 2013 energy analysis torrent in Description

Insert DWG

Insert DWG is a plug-in that gives you the ability to make a list of DWG files and insert them into a current Revit view. With one single step, you can easily view all of DWG files and insert them into Autodesk Revit 2013, Autodesk Revit 2014 and Autodesk Revit Architecture 2013.

Publisher: OFCDesk, LLC
Home page: www.ofcdesk.com
Last updated: March 21st, 2014

CBECC-Com

CBECC-Com (California Building Energy Code Compliance) is an open source project that may be used by Code Agencies, Rating Authorities, or Utility Programs in the development of energy codes, standards, or efficiency programs. Architects, engineers, and energy consultants may also use these tools to demonstrate compliance with energy codes or beyond-code programs.

Publisher: California Energy Commission
Home page: bees.archenergy.com
Last updated: November 7th, 2016

Sefaira for Revit

Generate Sefaira views to determine what families/elements are being interpreted in Sefaira. Generating views will filter out all families that are not relevant for your energy analysis. Once you’ve generated views, you can click into your Visibility/Graphics (hot key VG or VV) to see the model families that Sefaira reads.

Publisher: Sefaira Inc.
Home page: learn.sefaira.com
Last updated: September 29th, 2015

Autodesk Subscription Advantage Pack for Revit 2011

Autodesk provides a variety of online materials that help you to learn and use Autodesk Revit Architecture 2011 software or to develop complementary products. These materials are available in several formats. Explore the new Conceptual Energy Analysis tool with Revit Architecture and MEP

Publisher: Autodesk, Inc.
Last updated: October 31st, 2010

Anaglyph

CADstudio Anaglyph is an add-on utility for AutoCAD 2013, Inventor 2013 and Revit 2013 (both 32/64-bit). This .NET tool creates red-cyan 3D anaglyphs from current views of 3D CAD models inside the CAD applications. After you start the ANAGLYPH command, the application creates a 3D anaglyph image of the current perspective view of your CAD model.

Publisher: CAD Studio
Home page: www.cadstudio.cz
Last updated: April 8th, 2014

Additional Revit 2013 energy analysis torrent selection

Hourly Analysis Program

Carrier's Hourly Analysis Program is two powerful tools in one package. HAP provides versatile features for designing HVAC systems for commercial buildings. It also offers powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives. By combining both tools in one package significant time savings are achieved.

Publisher: National Institute of Building Sciences
Home page: www.wbdg.org
Last updated: September 28th, 2017

Psychrometric Analysis

Psychrometric Analysis is a handy tool that helps you to create psychrometric charts. The charts are drawn with unmatched accuracy. It allows for complete psychrometric and process analysis, all graphically displayed. It also provides a professional state point and process report detailing all of the psychrometric and process values

Publisher: Chempute Software
Home page: www.handsdownsoftware.com
Last updated: June 16th, 2012

Autodesk Ecotect Analysis

Autodesk® Ecotect® Analysis sustainable design analysis software is a comprehensive concept-to-detail sustainable building design tool. Ecotect Analysis offers a wide range of simulation and building energy analysis functionality that can improve performance of existing buildings and new building designs.

Publisher: Autodesk, Inc.
Home page: usa.autodesk.com
Last updated: June 1st, 2012

Aspen Energy Analyzer

Aspen Energy Analyzer provides an easy environment to perform optimal heat exchanger network design and retrofit. Using this tool, it is possible to cut down on unnecessary energy use, for a less expensive and greener process design. It’s easy to run energy analysis from within Aspen HYSYS or Aspen Plus using the Activated Energy Analysis feature.

Publisher: AspenTech
Home page: www.aspentech.com
Last updated: October 5th, 2015

CoolPack

CoolPack is a collection of simulation models for refrigeration systems. The models each have a specific purpose e.g. cycle analysis, dimensioning of main components, energy analysis and -optimization. It consists of "Refrigeration Utilities", "EESCoolTools", and a transient element called "Dynamic".

Publisher: IPU
Last updated: September 14th, 2012

Structural Analysis Toolkit 2014

Structural Analysis Toolkit 2014 is a suite of tools that supports the Building Information Modeling (BIM) process and allows structural engineers to analyze structures from within the Revit environment. Using this toolkit structural designers and engineers can optimize their workflows in the cloud and on the desktop by using the analytical model to conduct cloud-based structural analysis.

Publisher: Autodesk, Inc.
Last updated: December 18th, 2013

MEP Export to ArchiCAD Add-In for Revit MEP 2013

MEP Export to ArchiCAD Add-In for Revit MEP 2013 is a program designed to improve MEP element export from Revit MEP and AutoCAD MEP to GRAPHISOFT ArchiCAD. The Add-In enables you to save an IFC file that is specially enhanced for use in GRAPHISOFT MEP Modeler.

Publisher: Graphisoft
Home page: www.graphisoft.com
Last updated: October 30th, 2014

SimLab Collada Exporter for Revit

SimLab Collada exporter ,enables users to export Revit models as Collada files (*.dae). The plugin supports exporting Geometries with correct tree structure, Materials (Color, Transparency and Textures). SimLab Plugins are the right option for users who are looking for a specific feature to complete their 3D design application.

Publisher: SimLab Soft
Home page: www.simlab-soft.com
Last updated: November 27th, 2017

SimLab PDF Exporter for Revit

3D PDF files exported using SimLab 3D PDF exporter for Revit, in order to export 3D PDF files, press the export file button in the toolbar plugin, The user can select the scene(s) to be included in the generated 3D PDF file. 3D views are ready for selection from the Camera tab.

Publisher: SimLab Soft
Home page: www.simlab-soft.com
Last updated: November 29th, 2017

Carrier Hourly Analysis Program

Carrier's Hourly Analysis Program is two powerful tools in one package - versatile features for designing HVAC systems for commercial buildings AND powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives.

Publisher: Carrier Corporation
Home page: www.carrier.com
Last updated: March 16th, 2022