Xls building energy analysis in Title/Summary

Energy Analysis Utility

Building thermal performance calculations are made for two primary reasons. They are made to size and select mechanical equipment or to predict the annual energy consumption of a structure. While these two tasks are not mutually exclusive, and some programs can handle both tasks, they do tend to be conducted in isolation from each other.

• Publisher: Energy Analysis Utility
• Home page: www.wbdg.org

EnergyGaugeSummit

EnergyGauge is a family of user-friendly PC software tools that allow simple yet detailed performance-based analysis of building energy use and perform economic analysis of proposed energy improvements. This application can perform energy code calculations and compliance reports, building energy ratings and rating reports, and economic analysis of building energy improvements.

• Publisher: Florida Solar Energy Center
• Home page: www.energygauge.com
• Last updated: May 27th, 2014

Energy eVALUator

eVALUator is an easy-to-use Windows™-based program that calculates the lifecycle benefits of investments that improve building design. It analyzes the financial benefits from buildings that reduce energy cost, raise employee productivity, and enhance tenant satisfaction.

• Publisher: Southern California Edison Co.
• Last updated: January 26th, 2011

Xls building energy analysis in Description

Autodesk Ecotect Analysis

Autodesk® Ecotect® Analysis sustainable design analysis software is a comprehensive concept-to-detail sustainable building design tool. Ecotect Analysis offers a wide range of simulation and building energy analysis functionality that can improve performance of existing buildings and new building designs.

• Publisher: Autodesk, Inc.
• Home page: usa.autodesk.com
• Last updated: June 1st, 2012

TREAT

TREAT is a professional energy audit software for comprehensive energy analysis and building modeling. Main features: - Create models quickly and easily with building component libraries. - Calculate energy savings for individual improvements or assemble improvements in interactive packages. - Select Improvements from Libraries.

• Publisher: Performance Systems Development
• Home page: psdconsulting.com
• Last updated: October 7th, 2016

CBECC-Com

CBECC-Com (California Building Energy Code Compliance) is an open source project that may be used by Code Agencies, Rating Authorities, or Utility Programs in the development of energy codes, standards, or efficiency programs. Architects, engineers, and energy consultants may also use these tools to demonstrate compliance with energy codes or beyond-code programs.

• Publisher: California Energy Commission
• Home page: bees.archenergy.com
• Last updated: November 7th, 2016

BEIT

This software tool allows easy OTTV and RTTV calculations, and to make quick and reliable predictions of energy savings that can be achieved for various new design and retrofit measures. BEIT is developed specifically for use under the equatorial climatic conditions found in Malaysia.

• Publisher: Innovator Solutions Sdn. Bhd.
• Home page: www.acem.com.my
• Last updated: January 16th, 2014

EnergyGauge USA

EnergyGauge USA was developed specifically to allow the easy and accurate calculation of energy use and demand in residential buildings. In the past, most residential energy analysis tools have used simplified methods to calculate residential building energy performance.

• Publisher: Florida Solar Energy Center
• Last updated: September 25th, 2010

Additional Xls building energy analysis selection

Hourly Analysis Program

Carrier's Hourly Analysis Program is two powerful tools in one package. HAP provides versatile features for designing HVAC systems for commercial buildings. It also offers powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives. By combining both tools in one package significant time savings are achieved.

• Publisher: National Institute of Building Sciences
• Home page: www.wbdg.org
• Last updated: September 28th, 2017

Psychrometric Analysis

Psychrometric Analysis is a handy tool that helps you to create psychrometric charts. The charts are drawn with unmatched accuracy. It allows for complete psychrometric and process analysis, all graphically displayed. It also provides a professional state point and process report detailing all of the psychrometric and process values

• Publisher: Chempute Software
• Home page: www.handsdownsoftware.com
• Last updated: June 16th, 2012

Aspen Energy Analyzer

Aspen Energy Analyzer provides an easy environment to perform optimal heat exchanger network design and retrofit. Using this tool, it is possible to cut down on unnecessary energy use, for a less expensive and greener process design. It’s easy to run energy analysis from within Aspen HYSYS or Aspen Plus using the Activated Energy Analysis feature.

• Publisher: AspenTech
• Home page: www.aspentech.com
• Last updated: October 5th, 2015

eQUEST

eQUEST was designed to allow you to perform detailed analysis of today’s state-of-the-art building design technologies using today’s most sophisticated building energy use simulation techniques but without requiring extensive experience in the "art" of building performance modeling.

• Publisher: James J. Hirsch & Associates
• Home page: doe2.com
• Last updated: September 19th, 2010

CoolPack

CoolPack is a collection of simulation models for refrigeration systems. The models each have a specific purpose e.g. cycle analysis, dimensioning of main components, energy analysis and -optimization. It consists of "Refrigeration Utilities", "EESCoolTools", and a transient element called "Dynamic".

• Publisher: IPU
• Last updated: September 14th, 2012

OpenStudio

OpenStudio is a cross-platform collection of tools designed to support the whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance. It facilitates the community development, extension, and private sector adoption. The graphical applications include the Trimble SketchUp Plug-in, RunManager, and ResultsViewer.

• Publisher: National Renewable Energy Laboratory
• Home page: www.openstudio.net
• Last updated: October 5th, 2015

EnergyPlus

EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model both energy consumption and water use in buildings. It ships with a number of utilities including IDF-Editor for creating input files using a simple spreadsheet-like interface, EP-Launch for managing input and output files and performing batch simulations, and more.

• Publisher: US Department of Energy
• Home page: energyplus.net
• Last updated: May 29th, 2017

REScheck

REScheck is a program that makes it easy for builders, designers, and contractors to determine whether new homes, additions, and alterations meet the requirements of the IECC or a number of state energy codes. REScheck works by performing a simple U-factor x Area (UA) calculation for each building assembly to determine the overall UA of a building.

• Publisher: Building Energy Codes Program
• Home page: www.energycodes.gov
• Last updated: January 22nd, 2015

ETABS MATE

Professional software for design and draw reinforcement details of Concrete Structure in a developed and easy graphical interface according to building model analysis results of ETABS software. Also this software can save prepared structural drawings in AutoCAD file format.

• Publisher: FARASA Engineering Group
• Home page: www.farasaeg.ir
• Last updated: July 8th, 2014

BEopt

BEopt (Building Energy Optimization) is a program for evaluating residential building designs and identifying methods for energy savings. It can be used to analyze both new construction and existing home retrofits, as well as single-family detached and multi-family buildings, through evaluation of single building designs, parametric sweeps, and cost-based optimizations.

• Publisher: NREL
• Home page: beopt.nrel.gov
• Last updated: January 23rd, 2016