Podnova Player  Windows library  Podnova home
Multimedia | Business | Messengers | Desktop | Development | Education | Games | Graphics | Home | Networking | Security | Servers | Utilities | Web Dev | Other
License: All
Sort by: Relevance

Usb over ethernet connector in Title/Summary

USB over Ethernet Connector

USB over Ethernet Connector

When attached to a device with USB over Ethernet Connector, it's like you were working with equipment plugged into your local PC. The software lets you work with a USB device over Ethernet and get the same functionality as a direct connection.

USB to Ethernet Connector

USB to Ethernet Connector

Connect any USB device over a local area network or the Internet with USB to Ethernet Connector. It lets you share any USB device that is located on a remote PC over a LAN/WAN/VLAN/VPN or Internet and use it as if it was plugged into your own PC.

  • Publisher: Eltima Software
  • Last updated: March 23rd, 2008
USB Over Ethernet

USB Over Ethernet

New software solution allowing you to use remote USB devices as if they are plugged into your own PC. Share your USB devices and access remote devices without leaving your place!

  • Publisher: KernelPro Software
  • Last updated: July 29th, 2020

Usb over ethernet connector in Description

IBConfig

IBConfig

Internet Bridge can be connected to Internet via LAN – Ethernet connector or via dial up – MODEM connector. Maximal length of UTP cable (between IG-IB and Switching hub) is 100m according to IEEE 802.3. IBConfig is a free configuration Tool for IG-IB. - IG-IB unit is not configured from the factory - IB Config enables ethernet LAN configuration or dialup connection configuration

  • Publisher: ComAp spol., s r. o.
  • Last updated: February 12th, 2010
ODM inSpec

ODM inSpec

ODM inSpec is a program that allows the user to inspect and save fiber connector end face images and pertinent data. inSpec also provides automated pass/fail analysis according to the IEC-61300-3-35 specification and it has support for ODM’s VIS-400HDP, VIS-300 USB or VCM-410 USB module field connector inspection system.

  • Publisher: ODM, Inc.
  • Home page: www.odm-inc.com
  • Last updated: September 26th, 2014
Celsius 2007

Celsius 2007

CELSIUS is a computer program for the programming, control and logging of MEMMERT ovens with an RS-232, or alternatively RS-485, USB or Ethernet interface. With CELSIUS, you can create, change and save tempering profiles on your computer in graphical or tabular form.

  • Publisher: Memmert GmbH + Co. KG
  • Last updated: October 27th, 2011
KernelPro USB Over Ethernet

KernelPro USB Over Ethernet

USB over Ethernet is a professional tool that allows users to work with USB devices remotely over IP. You can connect to a shared USB device and use it just like it is plugged in your machine. Server and Client parts are installed on the same computer.

  • Publisher: KernelPro Software
  • Home page: www.kernelpro.com
  • Last updated: December 10th, 2014
SRP-350II POS Software Package

SRP-350II POS Software Package

SRP-350II POS Software Package is a powerful tool which integrates the most important options to configure your printer options. First of all, you can manage your communication settings by choose the printer, printer interface such as Serial, Parallel, USB or Ethernet, communication speed if the interface is serial or IP address and port number if the interface is Ethernet.

  • Publisher: BIXOLON
  • Last updated: May 14th, 2011

Additional Usb over ethernet connector selection

Presto! Digital Converter

Presto! Digital Converter

Presto Digital Converter 1.10 helps in converting various home videos into DVD format. The software converts any video tape to DVD format. The installation is easy and requires only a few components. These components are composite video input, audio L/R input, S-Video input and a USB 2.0 connector. Presto Digital Converter has two modes convert mode and record mode.

RemoteScan Server

RemoteScan Server

RemoteScan allows you to share scanners throughout your network. The Server Software is to be installed on the PC that has the scanner connected to it via a USB/Parallel/SCSI connector or Network TWAIN driver. The Client Software must be installed on all PCs that do not have access to a scanner. This is typically the Terminal or Citrix server.

  • Publisher: RemoteScan Corporation
  • Last updated: November 24th, 2015
LadderComOp

LadderComOp

This application is required for PLC ladder transfer via USB or Ethernet. When a V8 series is connected to the CPU port of a PLC, debugging has to be carried out by disconnecting and reconnecting two cables alternately: the cable that connects the PC to the PLC and the cable that connects the V8 series and the PLC.

  • Publisher: Hakko Electronics Co., Ltd.
  • Last updated: December 20th, 2019
NovAtel Connect

NovAtel Connect

NovAtel Connect is a windows-based GUI that allows you to access your receiver’s many features without the need to use a terminal emulator or to write special apps. It lets you easily communicate and configure your receiver via serial port, USB or ethernet connection using a PC.

  • Publisher: NovAtel Inc.
  • Home page: www.novatel.com
  • Last updated: May 18th, 2020
TiF454

TiF454

TiF454 is configuration software for Web Server F45 through USB or Ethernet ports. Web Server F454 is home automation controller hardware from the developer. It can be used to configure various components like lighting, alarm, CCTV, etc. Energy management settings are also available in the application.

  • Publisher: BTicino
  • Last updated: August 1st, 2013
Comfigurator

Comfigurator

Comfigurator is designed to allow the installer to program the Comfort Security and Home Automation system. It provides an easy to use interface for configuring all aspects of the system, and includes a Response Wizard to enable Responses to be programmed without the need for low level programming knowledge.

  • Publisher: Cytech Technology Pte
  • Home page: www.cytech.biz
  • Last updated: November 23rd, 2012
Cleverscope

Cleverscope

Cleverscope is a PC based mixed signal oscilloscope, spectrum analyzer and signal generator. The signal is captured by the Cleverscope Acquisition Unit that connects via USB or Ethernet connection to a local PC. The Scope contains the normal waveform display with an information panel, plus the option for displaying up 8 to digital inputs.

Daslight DVC1

Daslight DVC1

Daslight DVC1 is a DMX (Digital Multiplex) lighting software. It requires a Daslight USB or Ethernet interface to be connected to convert the control data from the software to DMX which the lights can understand. This package works with DVC controllers; they come with standalone memory, which can be programmed by Daslight.

PCView

PCView

PCView is a windows application for controlling radio navigation receivers. PCView provides way to connect a JNS receiver and a computer via serial, parallel, USB or Ethernet ports for tracking of the total number and the status of all visible satellites or displaying the receiver’s current position and time in real time.

  • Publisher: Javad Navigation Systems
  • Last updated: April 3rd, 2010
Related topics Trending topics

© Podnova Windows Library, 2024
Privacy • Cookie policy • Submit • Contact