Usb to ethernet connector in Title/Summary
USB over Ethernet Connector
When attached to a device with USB over Ethernet Connector, it's like you were working with equipment plugged into your local PC. The software lets you work with a USB device over Ethernet and get the same functionality as a direct connection.
- Publisher: Electronic Team, Inc.
- Home page: www.usb-over-ethernet.org
- Last updated: May 3rd, 2020
USB to Ethernet Connector
Connect any USB device over a local area network or the Internet with USB to Ethernet Connector. It lets you share any USB device that is located on a remote PC over a LAN/WAN/VLAN/VPN or Internet and use it as if it was plugged into your own PC.
- Publisher: Eltima Software
- Home page: www.eltima.com
- Last updated: March 23rd, 2008
Actiontec USB/Ethernet Home DSL Monitor
The Version tab (the second tab) displays three items. The Application Version is the software that allows your modem to work with your PC. The Firmware Version is the software embedded in the modem itself. The DSP Version is that of the chip that allows the modem to work.
- Publisher: Actiontec
- Home page: www.actiontec.com
- Last updated: March 2nd, 2008
Usb to ethernet connector in Description
IBConfig
Internet Bridge can be connected to Internet via LAN – Ethernet connector or via dial up – MODEM connector. Maximal length of UTP cable (between IG-IB and Switching hub) is 100m according to IEEE 802.3. IBConfig is a free configuration Tool for IG-IB. - IG-IB unit is not configured from the factory - IB Config enables ethernet LAN configuration or dialup connection configuration
- Publisher: ComAp spol., s r. o.
- Last updated: February 12th, 2010
OptomaPresenter
Optoma Presenter is a program that allows a remote desktop from a host PC to be displayed on a network display through Ethernet, USB, or Wireless connection. The program can adapt to different network settings such as DHCP, fixed IP, and direct link by using an USB/Ethernet cable.
- Publisher: Optoma Europe Limited
- Last updated: June 20th, 2016
Presto! Digital Converter
Presto Digital Converter 1.10 helps in converting various home videos into DVD format. The software converts any video tape to DVD format. The installation is easy and requires only a few components. These components are composite video input, audio L/R input, S-Video input and a USB 2.0 connector. Presto Digital Converter has two modes convert mode and record mode.
- Publisher: NewSoft
- Home page: www.newsoftinc.com
- Last updated: December 25th, 2011
Autostar Updater
Autostar Update is an application that functions to transfer the event files and software updates from your computer, through the serial port, USB or Connector Cable Set depending on your telescope model. It is critical that you use the most recent AutoStar Updater to ensure that you get the proper software updates for your system.
- Publisher: Meade Instruments Corp.
- Last updated: November 19th, 2020
WTViewer
WTViewer acquires numeric, waveform, and harmonic data from the WT3000/WT1800/WT500 Digital Power Analyzer via USB, Ethernet, GP-IB or serial communications (RS-232). WTViewer is an application that reads numeric, waveform, and harmonic data measured with the WT3000/WT1800/WT500 Digital Power Analyzer.
- Publisher: Yokogawa Electric Corporation
- Home page: tmi.yokogawa.com
- Last updated: August 14th, 2012
Additional Usb to ethernet connector selection
Anytime USB Charge Utility
Anytime USB Charge Utility allows you to charge an external device with a USB charge connector. Anytime USB Charge ports can be distinguished from standard USB 2.0 ports by the small power plug icon that is adjacent to the standard USB icon on the system surface.
- Publisher: FUJITSU LIMITED
- Last updated: September 1st, 2012
Python - pyvisa
PyVISA is a Python package that enables you to control all kinds of measurement devices independently of the interface (GPIB, RS232, USB, Ethernet). The program works with arbitrary adapters such as National Instruments, Agilent, Tektronix, Stanford Research Systems.
- Publisher: PyVISA Authors
- Last updated: April 30th, 2015
SATO All-In-One Tool
SATO’s new All-In-One printer management utility allows users to seamlessly configure their SATO products across their system-wide infrastructure. Whether the printer is connected, parallel, serial, USB, Ethernet or wirelessly, we give you access to local or networked SATO printers so that you can easily configure them to meet your needs.
- Publisher: SATO
- Last updated: June 22nd, 2017
USB Over Ethernet
New software solution allowing you to use remote USB devices as if they are plugged into your own PC. Share your USB devices and access remote devices without leaving your place!
- Publisher: KernelPro Software
- Home page: www.usb-over-ethernet.com
- Last updated: July 29th, 2020
Configure Boca
Configure Boca is a free printer configuration program that enables you to communicate from a computer to the printer over any interface (parallel, serial, USB, Ethernet). You can download program updates, upgrade the printer configuration and set selected printer functions.
- Publisher: boca systems
- Home page: www.bocasystems.com
- Last updated: October 31st, 2014
HpxView
HPXView is an intuitive graphical user interface,a simple but comprehensive solution to rapid service provisioning. Features: -Manage devices from low cost Windows workstations -Direct Management through HPXView via USB, Ethernet, Serial Console port -Remote IP based management; PPP over SONET/SDH DCC -Standards based management
- Publisher: Haliplex Communications
- Last updated: April 7th, 2012
IXXAT IxAdmin
IXXAT IxAdmin is an administration tool for the embedded platform which is connected to the device via USB, Ethernet or Wi-Fi. The scope of function: Up-/download of configurations, Start/Stop of configurations, Logging file upload, Execution of updates, Runtime license management, General settings.
- Publisher: IXXAT Automation GmbH
- Last updated: January 30th, 2018
KernelPro USB Over Ethernet
USB over Ethernet is a professional tool that allows users to work with USB devices remotely over IP. You can connect to a shared USB device and use it just like it is plugged in your machine. Server and Client parts are installed on the same computer.
- Publisher: KernelPro Software
- Home page: www.kernelpro.com
- Last updated: December 10th, 2014
- Publisher: REALTEK Semiconductor Corp.
- Home page: www.realtek.com
- Last updated: October 15th, 2024
